CIC energiGUNE Parque Tecnológico de Álava 01510 Miñano Tel. +34.945.297108
Nuria Gómez Head of the Unit firstname.lastname@example.org
Testing lab is aimed to the electrochemical characterization of any type of products (i.e. battery materials, batteries, super-capacitors, fuel cells, etc.) and chemistries. Testing equipment are useful for a wide range of applications such as: Materials Research Portable Electronic Devices Research & Development Battery Pack Assembly Super-Capacitor Testing Fuel Cell Testing Energy storage testing.
MACCOR BATTERY TESTER - 192 CHANNELS
The electrochemical lab is also equipped with a Series 4000 model battery tester. It is fully equipped with 192 channels; 166 for coin cell and 26 cables.
BIOLOGIC - 6 X BIOLOGIC VMP3
64 normal channels
28 EIS channels
5 low I channels
3 high I channels
Multichannel potentiostats (with PITT protocol) / galvanostats (with GITT protocol) with low current options, amplifiers and impedance measurement. The system are composed by an integrated sine wave generator and frequency response analyzer built onto the plug-in potentiostat module. These equipments allow working with the following techniques:
CLIMATIC CHAMBER - VOTSCH 7400
The climatic chamber (model VT7004) is appropriate to test cells at a constant temperature when it is critical in the performance and also to analize the effect of the temperature.
Temperature range: -70/+180ºC
Temperatura rate of change: 5.3K/min for heating - 4.7K/min for cooling
Voltamentry: OCV, CV, CVA, CA, CP, SV, LASV, ACV, LSV Impedance: GEIS, PEIS, SGEIS, SPEIS, PEISW Pulsed: DPV, SWV, DPA, DNPV, NPV, RNPV Ohmic drop determination: MIR, ZIR, Current imput Battery: GCPL (1 to 7), PCGA, CLD, CPW, APGC, Urban cycle simulation, ModuloBat, BCD; CED Corrosion: Linear and cyclic Polarization, Generalised Corrosion, Pitting, ZRA, ZVC, Corrosimetry, VASP, CASP Fuel/photovoltaic cell: IV Characterization, CDL.CPW Supercapacitor: CV, C Current, C Voltage Technique builder: Modular potentio/Galvano, Loop, Trigger in/out, Wait, RDEC