Electron Microscope Platform

Azpiegiturak
Ikerketa arloak
  • Physical Sciences
Kontaktua

Wei Zhang- Head of Unit Email: wzhang@cicenergigune.com Yan Zhang- Technician Email: yzhang@cicenergigune.com

Kanpoko erabiltzaileentzako eskuragarri?
Yes
Deskribapena

The Electron Microscopy Platform is the center for the microstructural characterization of the materials studied in the CIC Energigune. Ultimate spatial resolution combined with the simultaneous acquisition of spectroscopic data are used to guide the synthesis of new materials as well as to monitor structural developments induced under electrochemical reactions ex-situ down to the atomic level. The aim is to get an insight in the relation between structure and electrochemical properties. This service offers electron microscopy measurements using a Transmission Electron Microscope (TEM) and a Scanning Electron Microscope (SEM), as well as support with the relevant sample preparations. For sample preparation a dedicated laboratory especially offers the equipment for applying mechanical and ion beam thinning, carbon and gold coater and plasma cleaning. The services are provided for research groups within the center as well as to the external users like other research centers or other public organization, but also to commercial companies and private people.

Zerbitzuak

TEM high resolution imaging bright field/dark field imaging selected area diffraction hollow cone illumination STEM fast spot scanning elemental mapping EDX qualitative elemental analysis quantitative elemental analysis elemental mapping Image simulation particle shape focal series reconstruction high-resolution image simulation. SEM SE (Secondary Electron) low voltage imaging surface morphology BSE (Back Scattered Electron)Â material contrast topography Sample preparation for Light Microscope, SEM, TEM, XRF Separating: Diamond wheel saw Ultrasonic disk cutter Grinding and polishing: Grinding and polishing machine Dimple grinder Ion beam thinning: Precision Ion Polishing System.

Kokapena

CIC energiGUNE Parque Tecnológico de Álava c/ Albert Einstein 48 01510 Miñano Tel. +34.945.297108

Ekipamendua

The FEI Tecnai G2 is a 200kV field emission gun (FEG) high resolution TEM/STEM, which was installed at CIC Energigune in 2010, enabling you to solve a wide variety of materials science challenges in an easy and fast way. This electron microscopy excels in versatility and flexibility by combining high performance in all TEM, EFTEM, Lorentz, STEM and EDX/EELS spectrum imaging modes. The key feature of this microscope is the low energy spread of the electron beam (0.7 eV@200kV or less) which combined with the SuperTwin objective lens with a Cs of 1.2 mm, allows the determination of the electronic properties at atomic resolution.
FEI - TECNAI G2 F20 S-TWIN
Our Quanta 200 FEG (FEI) scanning electron microscope (SEM) was installed at CIC Energigune in the winter of 2010. It is a high resolution environmental microscope capable of running in 3 different modes: high vacuum, variable pressure and environmental modes, which means that it can handle all specimens even uncoated, non-conductive samples as well as wet samples that require being above the vapor pressure of water. The combination of high output thermal field emission (> 100nA beam current) with a high sensitivity (18 mm) allows get final resolution until 3-5 nm. The presence of a backscatter detector also will allow us measure electronic properties like the atomic contrast in our samples. The working voltages of the Quanta 200 FEG (FEI) scanning electron microscope vary between 3kV (low vacuum mode) and 30 kV (high vacuum mode). One key of our Quanta 200 FEG (FEI) SEM is that is it possible work at very low electron probe energies providing images of samples exhibiting low conductivities.
FEI - QUANTA 200FEG